Electrical Enclosure Thermal & Temperature Control

Electrical Enclosures Thermal & Temperature Control

Effective thermal and temperature control is crucial in electrical enclosures to maintain optimal operating temperatures and prevent failures due to overheating or condensation. With the increasing demand for high-performance equipment, proper thermal management can help ensure the longevity and reliability of enclosed electronics, protecting them from environmental hazards such as extreme temperatures, humidity, dust, and condensation.


Filtered Ventilation Fans & Grills

Filtered Ventilation Fan Vent for Electrical Enclosures

Ventilation Fans and Filters for electrical enclosures are essential accessories for maintaining optimal thermal control in electrical enclosures, and with all molded parts made of highly resistant and self-extinguishing ABS, they ensure maximum quality and safety.

IP Ratings
Filter Vents: IP54
Roof Vents: IP44

Types Available


Air Conditioners

Air Conditioners for Electrical Enclosures

IP Enclosures Steel or 316 Stainless Steel Air Conditioners are designed for the cooling needs of electrical enclosures, optimised for door or side-panel mounting, and have been designed for high efficiency and low maintenance.

Materials: Steel or 316 Stainless Steel
Types: Indoor & Outdoor
Environments:
Indoor Wall Mounted
Indoor Roof Mounted
Outdoor Wall Mounted


Heaters

Electrical Control Heater

Anti Condensation Heaters for electrical enclosures prevent failures and corrosion caused by low temperatures and high humidity, which can occur when ambient temperatures drop and the equipment fails to generate enough heat to maintain the minimum internal temperature.

Heating Capacity
From 25W to 750W (depending on Model and Range)

View the Heaters Brochure for more specific information.

Types Available


Thermostats & Controllers

Thermal Controller and Thermostat for Electrical Enclosures

Thermostats and Controllers for electrical enclosures.
Our range of controllers is suitable for use with IP Enclosures range of heating and cooling products.

Mounting: DIN 17.5mm and 35mm


Vent Hoods

Vent Hoods for Electrical Enclosures

Vent hoods to increase the protection of vents, vent filters, and internal components. The top of the vent hoods is inclined to prevent the settling and building up of liquids, corrosive solids, minerals, dust, dirt, and debris on top of the vent hood. All IP Enclosures electrical enclosure vent hoods are manufactured with nutserts for ease of installation and gaskets to prevent crevice corrosion.

Rating: IP55 (IP56 when combined with IP Enclosures fans & filters)
Materials: Powder Coated Steel or Grade 316 Stainless Steel


Vented Doors

Electrical Enclosure Vented Door

Vented doors feature pressed louvre vents to enable ventilation. The pressed louvre vents are located at the bottom and top of the door to enable improved air circulation. Vented Doors are optional inter-changeable doors that can be easily fitted to new or existing IP Enclosures electrical enclosures.

Materials: Powder Coated Steel or Grade 316 Stainless Steel